Best Seller 
94.5-97 7.3L HPO Lines Fitting Pack CNC Fabrication
if this fits your vehicle.
Dispatch within 24 Hours : Your product will be shipped quickly.
3-Year Warranty: Ignavo is safe with warranty conditions.
Description
94.5-97 7.3L Replacement Fitting Pack for CNC Fabrication HPO Lines
- All new Brennan Hydraulic fittings
- High quality Viton o-rings
Installation: Disconnect the battery grounds before installation to avoid accidentally arc’ing the line on the glow plug relay or the alternator charging lug. Use pictures from the product webpage for routing example. The fittings are marked with numbers to label install location.
After installation, be sure there is no other lines/wires that are touching the lines that could potentially rub through and damage either the HPOP line or the other line that may be touching it.
Use a small section of wire loom protector or a larger piece or rubber hose to wrap around the contact point. Many will remove or bend the engine eyelet on the driver side as a precaution, but it is not necessary.
Sealant is not necessary, but IF you choose to use any, use Loctite 680 or Permatex 64000 retaining compound (green) only on the fittings installed in the HPOP. If you are unsure of installing yourself, seek out a competent and qualified technician to install the lines.
Hose ID: 98.5-03 Superduty 2 line – Both side are same length. 94.5-97 OBS 2 LINE – Passenger is longer of the 2
Fitting Markings: 1- Front Port Pump 2- Rear pump port 3- Driver head 4- OBS passenger head 5- SD Passenger head and crossover
Pump Fittings:
- 28FT/LBS
- Head Fittings: 23FT/LBS
- Hose Ends: 21FT/LBS
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 5 × 1 in |
| Country of Origin | USA |
| Engine Manufacturer | Powerstroke |
| Engine Volume | 7.3 Liter |
| Fuel Type | Diesel |
| Material | Steel |
| Sold As | Each |
Related products
Reviews
There are no reviews yet.